Eagle Security Systems offer a variety of Access Control options for both residential and commercial properties. We offer products from Rosslare and Nidac / Presco. Eagle Security Systems can provide you with a customised system to suit your individual requirements and budget. For further information, or to obtain a free no obligation quote please contact our sales team on 1300-259-260 or sales@eaglesecurity.com.au

Rosslare Weather Resistant Keypad

 

Product Code: ACQ41

·  Built-in Heater - Automatic Low Temp Activation
·  500-user PIN capacity controller
·  (2 x) 2 Amp Form C Relays
·  2 Inputs
·  2 Bi-Color LED programming menu
·  Fully Potted
·  Rated IP65
·  Optical Case and Back tamper
·  12-24 VAC or 12-24 VDC input
·  3 user levels and 3 security levels
·  Door Bell key feature (Star key works as bell with BL-D40 Sounder or Rosslare
    power supplies with Bell feature).
·  10-Wire Interface (10 Colors / Label on Back Of Unit), 0.6 meters length.

 

Rosslare Weather Resistant Keypad

 

Product Code: ACG43

 ·  500 PIN users
·  (2x) 5A Output Relays
·  2 Inputs
·  3 security modes and 3 user levels
·  Weather-resistant housing
·  Large RED ILLUMINATED KEYS
·  2 Bi-Color LED Menu 
·  Fully Potted
·  Rated IP65
·  Optical Back Tamper
·  12-24 VAC or 16-24 VDC Input
·  10-Wire Interface (10 Colors / Label on Back Of Unit).

 

 

Rosslare Backup Power Supply

 

Product Code: PS-B15T

The PS-B15T built-in battery circuit comes complete with transformer and power supply. Used with the AC0052 and AC0053.


The Presco PRE (Presco Remote Encoder) is a budget priced keypad designed to be used in conjunction with the PAC series of door access controllers.

The PRE is ideally suited to areas where keypad security is desired, but weather and vandal resistance is not a priority.
When a PRE is coupled with any PAC series door access controller you get the benefits of a cost effective door access control solution with all of the features of the Presco system. Like all of the Presco readers the PRE is also compatible with the CS Technologies range of access controllers.
    Some features of the Presco PRE are:
  • Compatible with the Presco PAC series decoders
  • When integrated with the Presco PAC series access controllers the entire system uses low cost non-shielded cable and readers can be up to 1 kilometer from the door controller
  • Over 19,000,000 possible code combinations
  • Audible and visual confirmation of all actions
  • Available in contrasting colour schemes
  • Sealed tactile buttons
  • 17mm thin surface mounting
  • Up to 9 additional keypads can be connected to a single decoder
  • 36 month manufacturers warranty

Presco PAC 1 and PAC 2 door controllers

 

  • Two models of door access controller to choose from: the PAC1 single door controller & the PAC2 two door controller
  • Compatible with the entire range of Presco encoders including the PRE standard keypad, PSE rugged keypad & PRX and SPRITE proximity readers
  • Can be interfaced with other readers such as Wiegand format readers or Dallas iButton readers (CS Technologies CS-KEYRDR reader) with the addition of a Presco PIM interface module
  • Split system for maximum security
  • Door Forced Open detection
  • Door Open Too Long (DOTL) function
  • Request To Exit (RTE) function
  • Automatic Door Relock function
  • Easy on-site programming using a Presco keypad
  • 400 client programmable user codes
  • All programmed information is stored in non-volatile memory
  • Up to 10 encoders can be connected to a single decoder
  • Two heavy duty 5 Amp relay contacts for electric latch control
  • Can operate fail safe and fail secure electric locking devices
  • Two 1 Amp Normally Open DOTL alarm relay contacts
  • 36 month manufacturers warranty
  • Designed and manufactured in Australia
Presco Access Tags

Heavy duty key tag 1.5mm thin teardrop type programmed to suit Presco and Wiegand formats